Check items to add to the cart or select all
Category Navigation:
Recently Viewed
You're currently on:
USD Junior Transformer White Skate
These USD junior skate transformer style roller blades fit UK size 1-3, grown up agressive skates for a growing new rollerskater. Possibly the best looking junior sized aggressive skates to be released, Not just for a youngster these are also ideal for someone older with small feet as these USD kids aggressive skates are designed with top quality spec including Kizer UFS frames, USD 57mm 90a wheels, ABEC 5 bearings, UC 48mm anti rockers, USD junior soul system, USD liners and tightening strap. Designed to be fully functional aggressive skates that can be used for jumping, grinding and sliding and all of the other possible tricks that you can think up to perform. We recommend that everyone skates with all of the protective gear including a helmet, knee pads, elbow pads and wrist guards to prevent against injuries.
How USD Kids Transformer skates adjust:
Step 1: Unbolt the two frame bolts that attach the frames to the boot
(Remember that the longer bolt is for the front and the shorter bolt is for the rear)
(Don't lose the washers!)
Step 2: Use an allen wrench to hold the front T-Nut in place (what the front frame bolt was screwed into) If you don't hold it in place, it can slightly slide back away from its hole, which would just require you to get it back into its correct placement in order to be able to screw the frame bold back in.
Step 3: Slide the front toe cap to the desired length (It has a max position that you can move forward and max position that you can move back). Then adjust the front insole piece of the liner, which slides in and out of the bottom of the liner. This will require you to undo the buckle, undo the velcro strap and loosen up the laces to be able to reach inside the liner to move this insole piece in and out. This entire step might require some trial and error of putting your foot back into the skate and seeing what position feels the most comfortable for you.
(On a side note, the tongue is attached to the black toe cap and not the liner. The liner can be removed but when you put it back into the skate you need to make sure that you slide the tongue underneath the black fabric piece that crosses across the liner)
Step 4: Bolt the frames back on by starting with the front frame bolt (Make sure the front T-Nut is in place, otherwise you will have nothing to screw into)
Step 5: Put the wheels back into the frames and make sure that the axle bolts are tightened
Step 6: Go out and have fun skating!
USD - Transformer - Size Adjustment (How To) from TheConferenceTV on Vimeo.
Delivery
|
Content coming soon for detailed T&C please see bottom of Home Page. |
Returns
|
